RS485 + LAN
max. 30 devices per bus, max. 90 devices.
Power reduction
cos phi
RS485
WLAN
If the RS485 connection is used, the WLAN dongle must not be plugged in!
Connect the inverters to each other using a patch cable. Cut open the cable and connect it to the e.manager.
e.manager terminal A <=> PIN 6 (green)
e.manager terminal B <=> PIN 3 (green-white)
Inverter configuration
Assign a unique RS485 ID to each inverter.
Restart
After configuration, please disconnect the inverter once on the AC and DC side and restart it.
LAN
Connect each inverter to the switch or router using a LAN cable.
Software version
Please make sure that the inverter has the latest software version, which also supports the SunSpec protocol.
IP address
The inverter requires a fixed IP address.