e.manager terminal A <=> KMTronic terminal A
e.manager terminal B <=> KMTronic terminal B

The KMTronic RS485 relay card has 8 change-over relays, 230V~ 7A. The relay card requires a power supply of 12VDC/1A (not included).

RS-485 adress

Set an ID between 1 and 15 using the DIP switches.

In the delivery state, the address is set to 1.

Like the inverters, the relay cards must also be searched for under the item   Configuration = > Search devices.

The KMTronic RS485 relay card has 8 changeover relays, 230V~ 7A. The relay card requires power supply of 12VDC/1A (not included).

Set IP address

Assign a unique IP address to the relay card, see instructions.

Default IP: 192.168.1.199

The relay cards must be searched for like the inverters under the item   Configuration => Search devices.